Cree Connected LED Bulb review

The correct brilliant globule at the ideal time, at the correct cost

 

 

The Good / The Cree Connected LED flaunts strong lighting specs, solid convenience, an extensive variety of control alternatives, and a marvelous value point.

The Bad / Unlike standard Cree LEDs, the new associated globules won’t diminish exceptionally well on dimmer changes because of impedance from the inherent Zigbee darkening smarts. Additionally, the all-plastic tasteful probably won’t interest everybody.

The Bottom Line / With dependable equipment inside the globule and smooth execution on various stages, this $15 brilliant knob is a shrewd wagered for associated lighting.

Cree was reluctant to add a keen knob to its top of the line LED lineup, yet that changed for this present year with the option of the $15 Cree Connected LED. Sharing the assemble and lighting specs of a year ago’s all around surveyed Cree 4Flow LED , the new Connected LED includes a Zigbee radio. Match it with a control center point, and you’ll have the capacity to turn it on and off remotely, or timetable computerized lighting changes.

At dispatch, Cree’s brilliant knob was fairly hitched to the Wink Hub , which appeared well and good given that you’ll purchase both off the rack at Home Depot. From that point forward, in any case, we’ve seen official help take off for extra control doors, including SmartThings and the Philips Hue Bridge . You can add the knobs to the new D-Link rendition of the Staples Connect Hub , as well, despite the fact that there isn’t legitimate, Zonoff-ensured bolster right now.

The globule functions admirably over the majority of the stages we’ve tried it with, and it shares the solid lighting specs of the 4Flow LED that preceded it. Most engaging is the cost. At $15 – only a couple of dollars more than you’ll spend on non-associated contenders – it ties with the GE Link LED as the most modest associated knob available. For essential mechanized lighting, it’s the best choice we’ve tried yet, and our present Editors’ Choice victor.

Plan and highlights

Cree adjusted its shrewd globule outline from a year ago’s 4Flow LED, pressing a Zigbee radio into the current form. That implies this isn’t a globule that makes a special effort to look extravagant or brand new – rather, it duplicates the 4Flow’s accentuation on imitating the outline of great incandescents.

I enjoyed that methodology with the 4Flow, and I like it with the new Connected LED as well, however some may observe the plastic form to be somewhat modest looking, particularly when the globule is killed.

The new globule additionally shares the 4Flow’s convection cooling trap, which utilizes vents to circle air through the body of the knob, taking out the requirement for warm sinks. That cuts generation costs down, and furthermore implies that the knob is astoundingly light for a LED, tipping the scales at under 2 ounces.

The Cree Connected LED has indistinguishable lighting specs from the 4Flow LED, as well, and that is to a great extent something to be thankful for. Both case a light yield of 815 lumens, and both checked in significantly higher than that before our spectrometer – 835 lumens for the 4Flow, and an exceptionally great 872 for the Connected LED.

As far as proficiency, the 4Flow puts its light out utilizing 11 watts, yet the number ascents to 11.5 watts for the Connected LED by virtue of the Zigbee radio’s capacity draw. When we tried it out, the number was in reality more like 11.1 watts, so Cree’s completed a great job of keeping this globule generally productive. In any case, it’s important that both the Philips Hue Lux LED and the Belkin WeMo LED are much more productive, every one illustration under 10 watts.

Cree additionally completed a great job with shading temperature here, landing to a great degree near the expressed 2,700K. At 2,696K, the Cree Connected LED lands nearer to the stamp than some other shrewd globule we’ve tried, so in case you’re exacting about that ideal shade of warm, yellowy light, you’ll like this LED.

The one place where Cree’s keen globule falls behind in any event a portion of the opposition is the shading rendering score, which estimates how precisely a given light source enlightens distinctive shades. The Cree Connected LED hits a fairly common score of 80 out of 100, and given that both the WeMo LED and the similarly cheap GE Link LED hit more like 90, I’d have jumped at the chance to see Cree improve the situation.

To get to the Cree LED’s savvy highlights, you’ll have to match it with a control center point that can make an interpretation of its Zigbee motion into Wi-Fi. Like the GE Link LED, the Cree Connected LED turned out the door trumpeting Wink bolster at dispatch, yet before long extended its outsider similarity to incorporate choices like SmartThings, Staples Connect , and the Philips Hue Bridge .




┬áDiverse stages offer distinctive highlights – SmartThings and Philips bring IFTTT bolster into the photo, for example – yet all in all, the mechanizing background is to a great extent the same. We tried the globule on various stages, and never kept running into any troubles blending it or controlling it.

Despite which stage you’re utilizing, you’ll have the capacity to turn the Cree Connected LED on or off remotely, diminish it, or computerize it utilizing whatever controls your framework offers. These conceivable incorporate setting the lights to a coordinated calendar, or matching up them up with things like movement sensors.

The globule matched effortlessly with every one of the previously mentioned stages. Wink and SmartThings both have devoted settings and blending guidelines for the Cree LED right in the application, which makes a difference. Staples Connect doesn’t offer gadget particular help for Cree at this time, however it could identify the globule as a nonexclusive Zigbee gadget on the primary attempt.

Synchronizing the Cree LED with a Philips Hue setup was truly easy, as well, despite the fact that I expected to physically reset the globule amid the blending procedure keeping in mind the end goal to enable the extension to discover it. Doing as such isn’t dubious – simply turn the globule on for 2 seconds, at that point off for 2 seconds a

Execution and ease of use

First of all: as a light, the Cree Connected LED is superbly average. Regardless of whether you don’t possess a center point and don’t anticipate getting one yet, you could purchase Cree’s keen globule, utilize it as a plain ol’ idiotic knob, and – generally – be very content with it.

I say “generally” as a result of the globule’s diminishing abilities. The 4Flow LED that the Connected LED is designed according to worked exceptionally well with dimmer switches, and was fit for dialing the light all over without glimmer or buzz. Since they’re pretty much indistinguishable, you may expect that the Connected LED would go with the same pattern.

Dimmer change similarity goes out the window, notwithstanding, when globules accompany shrewd diminishing instruments of their own, and the Cree Connected LED is no special case. Attempt and diminish it utilizing a dimmer switch, and the two darkening systems will conflict, making moderate extreme buzz and glimmer. It’s a minor concern given that the in-application darkening is smooth, straightforward and free of both flash and buzz, yet at the same time, it’s something to know about.

Blending Cree’s LED with Wink takes not as much as a moment, and every globule we included combined the main attempt.


Notwithstanding similarity with different stages, Cree still prints blending directions with Wink ideal on the bundling. Associating Cree’s keen globules with the Wink application was a simple procedure: simply advise the application you need to add a Cree Connected LED to your setup, at that point turn the knob on when it instructs you to. Blending the globules chipped away at the principal attempt in every last one of my tests, and never took longer than a moment from beginning to end. That is an extraordinary outcome, and furthermore a consolation, honestly. The GE Link LEDs I tried a year ago each took a few endeavors previously they’d match effectively, which got genuine baffling genuine brisk.

The one issue I experienced amid the matching procedure had nothing to do with the knobs themselves, yet rather, with the center. Wink expected me to refresh the center to the most up to date firmware before it’d given me a chance to add Cree knobs to my setup. Sounds basic enough, yet it took a few endeavors on three distinctive Wi-Fi organizes before I could at long last get the refresh to introduce effectively.

You’ll have the capacity to robotize your Cree lights utilizing Wink’s Robots. In the model over, the lights kill naturally at whatever point I leave home, furnished I have my telephone with me.


Once your Wink Hub is a la mode and your knobs are combined, the application encounter is a decent one. Essential control of the lights is natural – simply tap a knob to turn it on or off, or swipe right or left to diminish it up or down. Different stages offer controls that are comparative, if not marginal indistinguishable.

Mechanization is likewise really easy on account of Wink’s Robots include, which completes an incredible activity of strolling you through the procedure. You can set your lights to turn on or off at whatever point certain conditions are met – landing at home, or setting off a movement sensor, for example. In my tests, the Robot computerizations worked impeccably to the extent Cree’s knobs were concerned. I was particularly glad to see the application do well with geofencing robotizations that identified when my telephone entered or left the territory instantly around my loft – these kinds of mechanizations didn’t work out so well when I tried the Quirky Aros Smart Air Conditioner a year ago.

You’ll likewise have the capacity to spare preset lighting alternate routes, plan computerized lighting changes, or view a movement feed.


Notwithstanding remote controls and Robot creation, you can make alternate routes – spared presets for various lights and gadgets that you trigger at the same time with a solitary tap. For example, a “Film Mode” alternate route may diminish various lights down to a pleasant, low level for those late-night Netflix gorges.

You can likewise plan coordinated lighting changes, at that point see the majority of your booked robotizations in a convenient schedule see. In the event that you need to control different lights on the double, you can assemble them together. Moreover, you can see an action timetable for your entire framework, and see who changed what, when.

SmartThings, Staples Connect, and Philips Hue can each control the Cree Connected LED, as well.


Despite which stage you’re utilizing, you’ll have the capacity to turn the Cree Connected LED on or off remotely, diminish it, or computerize it utilizing whatever controls your framework offers. These conceivable incorporate setting the lights to a coordinated calendar, or matching up them up with things like movement sensors.

The globule matched effortlessly with every one of the previously mentioned stages. Wink and SmartThings both have devoted settings and blending guidelines for the Cree LED right in the application, which makes a difference. Staples Connect doesn’t offer gadget particular help for Cree at this time, however it could identify the globule as a nonexclusive Zigbee gadget on the primary attempt.




┬áSynchronizing the Cree LED with a Philips Hue setup was truly easy, as well, despite the fact that I expected to physically reset the globule amid the blending procedure keeping in mind the end goal to enable the extension to discover it. Doing as such isn’t dubious – simply turn the globule on for 2 seconds, at that point off for 2 seconds a

As said before, you’ll find comparable controls on different stages, as well, and in my tests, Cree’s LED dependably functioned admirably. I detected some infrequent idleness with robotized lighting changes on Staples Connect, and experienced comparable slack with the GE Link LED. The two knobs aren’t authoritatively bolstered yet, however Zonoff reveals to me they’re trying them now and hope to guarantee them soon. When they do, anticipate that the center’s code will be better enhanced to wipe out those laggy computerizations.

Your other enormous name control alternatives are SmartThings and Philips Hue. Both bring IFTTT bolster into the discussion, and both gloat open APIs and strong outsider similarity. Like Staples Connect, SmartThings offers coordinate association with things like movement locators, which for some may make it a more engaging pick than Philips Hue.

The decision

Cree’s unique LED jumped a significant part of the opposition when it appeared in the start of 2013, and now, the Cree Connected LED looks prepared to stick to this same pattern. At $15 per globule, it offers preferable incentive over the Osram Lightify and Connected by TCP starter packs, a vastly improved an incentive than Belkin’s WeMo LEDs or the Philips Hue Lux LEDs , and preferred execution over the similarly moderate GE Link LED , as well.

You’ll require an outsider center point keeping in mind the end goal to control the globules, however you have a decent scope of choices now, and Cree networks well with every one of them. Regardless of whether you aren’t sold on the keen home yet, Cree’s Connected LEDs just cost a couple of dollars more than non-associated contenders, and perform well notwithstanding when you aren’t giving their smarts something to do. That makes purchasing now and robotizing later a sensible methodology, insofar as your home doesn’t utilize dimmer switches.

Savvy lighting is one of the clearest advances to more extensive keen home selection. By concentrating on wide outsider similarity, solid convenience, and a low value point, Cree’s situated its Connected LED to move the needle, similarly as the organization did with LEDs everywhere in 2013. Depend on it – this is the keen globule to beat.

2 COMMENTS

LEAVE A REPLY

Please enter your comment!
Please enter your name here